Inicio | Sobre Valvias | Login sponsor | Sponsor Info | Valvias Tv | Contactar | Mapa del Sitio |
Valvias El portal de Válvulas y Actuadores más visitado
  Abierto a todos fabricantes y distribuidores
Home contact
Conceptos Básicos
Tipos de Válvulas
Tipos de Actuadores
Normas y Tests
Literatura Técnica
Empresa en Mapa
Peticiones de Oferta
Ofertas de Trabajo
Valvias Tv
Login sponsor
Sponsor Info
Sobre Valvias
Mapa del sitio
Notícias English
Noticias del sector de las válvulas y actuadores
Tema de Búsqueda:
Noticia: [26-30]/502Página: 6/101
Alstom to supply additional equipment to Santo Antonio hydropower plant in Brazil
9 diciembre 2013, Paris (Francia)

Alstom signed a contract1 to supply additional equipment to Santo Antonio hydro plant, in Brazil, complementing the current project. Alstom will supply two more Bulb turbines, four generators, two speed governors, two excitation systems and six bus bars. IMMA, a joint venture of Alstom and Bardella, will also be responsible for 100% of the hydromechanical and lifting equipment. Alstom’s scope in the project is worth around €80 million.

Located in Madeira River, in the North of Brazil, Santo Antonio is considered one of the largest hydro plants in the country and will generate enough energy for 44 million people. The equipment will improve the power production of the plant by 417 MW, achieving 3,568 MW for the entire project. The new equipment will be produced at the Taubaté unit which is one of the biggest Alstom hydro factories. This new part of the project will be concluded in December 2016.

Alstom signed its first contract for the Santo Antonio hydro plant in 2008 with a scope of 19 turbines and 22 generators as well as the IMMA scope of 100% of the hydromechanical and lifting equipment. Today 40 % of this first scope is already concluded and successfully operating...(+)
Empresa: Alstom Fuente: Alstom
FMC Technologies Awarded $30 Million Contract for Remotely Operated Vehicles (ROVs) from Tidewater Subsea
4 diciembre 2013, Houston (USA)

FMC Technologies, Inc. (NYSE: FTI) announced today that it has received an order from Tidewater Subsea (Tidewater) to supply a fleet of six work-class ROV systems for its subsea operations business. The ROV systems will be supplied by FMC Technologies' Schilling Robotics business unit and are expected to be delivered before the end of 2013. The contract value is approximately $30 million in revenue.

FMC Technologies will supply integrated Heavy Duty work-class ROV systems, which will be mobilized onboard Tidewater's deepwater vessels to service the global oil and gas offshore construction and Inspection, Maintenance, and Repair (IMR) markets.

"FMC Technologies is very pleased to have been awarded this contract by Tidewater," said Tore Halvorsen, FMC Technologies' Senior Vice President, Subsea Technologies. "These Heavy Duty work-class ROV systems will allow Tidewater to further expand its life of field service offering to the oil and gas market."
Empresa: FMC Technologies Fuente: FMC Technologies
Wireless Pakscan controls the flow at Nevada gold mine
3 diciembre 2013, Bath (Reino Unido)

A gold mine in Nevada USA has been able to take advantage of wireless Pakscan digital control for newly installed IQ intelligent electric valve actuators on the water filtration plant.

The Newmont underground mine utilises Geotube® dewatering technology to separate sediment from both ground and extraction process water. The filter systems, which are installed above ground, are fabricated from a woven material which is permeable to water while retaining solids and sludge. Excess water drains through small pores, resulting in effective dewatering of the contained material, which is then processed to extract the gold.

The large scale filtration operation has been automated by the motorisation of 15 widely distributed inlet and isolating valves with Rotork IQ actuators and a Modicon PLC to supervise the operation of the plant.
Empresa: Rotork Fuente: Rotork
Lord Mayor of Mannheim visits the headquarters of the VAG Group in Mannheim
20 noviembre 2013, Mannheim (Alemania)

As a leading employer in the Rhine-Neckar District, VAG has become important to the region through its steady growth in Germany and abroad, and its capacity for innovation.
This prompted the Lord Mayor of Mannheim, Dr. Peter Kurz, together with the Deputy Mayor and other staff members of the Mannheim City Administration, to visit the headquarters of the VAG Group in Mannheim on 18 November 2013.

The Managing Director of the VAG Group, Robert Mr Fellner-Feldegg, welcomed the visitors to the VAG Visitor Center and told them about the history of VAG. The guests were given an overview of where VAG valves are put to use during a walk around the Visitor Center and the Technical & Service Center. A practical on-the-spot demonstration of the VAG RIKO plunger valve, a walk around the VAG Gallery of History and a guided tour through the production section rounded off the visit. Lord Mayor Dr. Kurz made special reference to the Visitor Center and the demonstrations given, saying that they were particularly impressive. "It's not often that you see something like this," he pointed out, and wished VAG continued success.
Empresa: VAG Armaturen Fuente: VAG Armaturen
Valvekits to stock Soldo hazardous area switchboxes
18 noviembre 2013, Bath (Reino Unido)

Rotork Valvekits, Rotork’s specialist valve mounting kit company, is now the UK stockist for Soldo switchboxes. Soldo is a highly regarded manufacturer of compact switchboxes featuring a range of switch options with local visual position indication for rotary quarter-turn pneumatic actuators.

Rotork Valvekits will predominantly stock Soldo switchboxes for hazardous area applications, encompassing the SK and SQ explosionproof ranges and intrinsically safe models from the SP range. SK and SQ switchboxes are internationally certified for installation in EExd Zone 1 and 2 hazardous areas by ATEX, IECEx, GOST (Russia) and CCOE (India).

Available with painted aluminium or polished 316L stainless steel enclosures, these switchboxes can be supplied with electromechanical switches, magnetic switches, proximity sensors or inductive sensors to suit user requirements. A pre-wired terminal strip incorporates two extra terminals for solenoid valve connections. Integral adjustable Namur standard mounting legs enable swift attachment to any actuator with VDI/VDE3845 dimensions...(+)
Empresa: Rotork Fuente: Rotork
<<1 .. 2 3 4 5 6 7 8 9 10 .. 101>>
© 2007-2013 www.valvias.com, Todos los derechos reservados.
Prohibida la reproducción total o parcial del contenido de este site, sin la autorización expresa del propietario del copyright.